Truma COMBI D6-KIT Diesel Heater / Hot Water System with Cream Cowl
$3,349.00
Dimensions 525W x 450D x 300H Weight 16.2Kg Warranty 2 Years
Pre order
Truma Combi D 6 Kit, Diesel Heater / Hot Water System with Cream Cowl. Truma Combi D 6 is a powerful diesel heater that can also be used to heat water. It is especially suitable for larger motor homes. The heater has a burner that operates with the time-proven technology from Eberspächer in Esslingen (Germany). It is supported by a fan so that the motor home heater also works while you’re driving. In summer, you can heat just the water without using the space heater.
Features:
Cream Cowl
The powerful, quiet fan ensures optimum warm air distribution
Compact and space-saving, which allows various installation options for Combi D 6
Low energy consumption
More details about Truma Combi D 6:
Combi D 6 is extremely compact and an absolute lightweight compared to other heaters with a similar output. Your Combi heater is controlled simply with a digital control panel. In combination with a Truma air conditioner, you can also select the automatic climate control option on the control panel. This ensures that inside the vehicle you always have the desired temperature.
Truma Combi D 6 can also be operated with an empty water tank
FrostControl drain valve is installed
Infinitely variable temperature adjustment with the digital CP plus control panel
Automatic climate control possible in combination with a Truma air conditioner
Energy sources Diesel as per EN 590
Rated heat output in gas mode 2000 W / 4000 W / 6000 W
Fuel consumption 220 – 630 ml/h (110 ml/h with average heat output of 1000 W)
Power consumption (at 12 V): operation of heater and water container
1.8 – 4 A (in normal operation between “Off” and “lowest operating level” less than 1.8 A)
Water capacity 10 litres
Heating time (from approx. 15 °C to approx. 60 °C): Water container approx. 20 min.
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033
Weight approx. 15.8 kg
Dimensions (L x W x H) 525 x 450 x 300 mm
Installation dimensions (minimum dimensions–additional space must be provided for the gas connection. water connections and drain valve (L x W x H) depending on the installation situation) 540 x 500 x 350 mm
Power consumption (at 12 V): heating water container max. 1.8 A
Air flow rate (free blowing) max. 287 m³/h
Quiescent current approx. 1 mA
Quiescent current consumption CP plus (optional) 3 mA
Frost Control heating element (optional) max. 0,4 A
Pump pressure max. 2.8 bar
System pressure max. 4.5 bar
Truma_Combi-D6-Operating-Instructions (Click here to download) No video available.
