Enerdrive ePOWER Smart Battery Charger 100Amp 12V AC

SKU EN312100

Output Current Rating (Amps) 100

Model EN312100

Product Type 12v 100Amp Battery Charger

Ingress Protection IP32 (Basic drip proof in vertical orientation)

Float 13.4 – 13.8 V

AC Input Voltage 100 to 240 VAC

DC Output Three (1 fully independent, 2 common with diode isolation)

DC Output Ground Single Heavy Duty Common Ground Stud

Battery Temp Sensor Port RJ12 (standard battery temp. sensor supplied)

Reverse Polarity Yes, (with user replaceable fuse/s)

Over Temperature Protection Yes, unit de-rated and shutdown

Equalize 15.5 V

Storage Range (temp) -40° to 70° C

Power consumption (DC 12V) 1750W (Full Load)

Charging Control Four stages (Bulk/Absorption/Float/Maintenance) Two stages (Bulk/Absorption), Constant Power Supply (Program setting), Priority Battery Bank Charging

Output System Voltage 12V

Operating Range (temp) -20° to 60° C

Charger Voltage 12V

Humidity 5-95%, relative humidity non-condensing

Net Weight (kg) 6.4

DC Output Connection Heavy Duty Terminal (3 banks) – Hex Nuts 8mm Thread

Output Short Circuit Protected, charger shutdown

Power Factor Correction Yes

Temperature Setting Hot, Normal, Cold (no sensor connected)

Charger Mode Output Voltage 14.2 – 15.5 V

Charger Efficiency > 82%

AC Input Operating Range 207-265 VAC (7.6 A Max)90-125 VAC (15.9 A Max)

Standby Current < 5 mA LCD Display Charging status, Battery Voltage, Output Current & Fault Codes. Dimensions 425 x236 x 102.7 mm (L x W x H) Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations. AC Input Connection IEC with Supplied 1.2M Power Lead Over Charge Yes, unit shutdown AC Input Frequency Range 47 – 63 Hz Selectable Battery Type Gel, AGM, Flooded, Lithium, Program Optional Accessories Remote Digital Display / Enerdrive Part Number EN3REM Cooling Forced air ventilation (thermo controlled fan)