Enerdrive ePOWER Smart Battery Charger 40Amp AC 12V

SKU EN31240

Output Current Rating (Amps) 40

Model EN31240

Product Type 12v 40Amp Battery Charger

Ingress Protection IP32 (Basic drip proof in vertical orientation)

Float 13.4 – 13.8 V

AC Input Voltage 90 to 265 VAC

DC Output Three (1 fully independent, 2 common with diode isolation)

DC Output Ground Single Heavy Duty Common Ground Stud

Battery Temp Sensor Port RJ12 (standard battery temp. sensor supplied)

Reverse Polarity Yes, (with user replaceable fuse/s)

Over Temperature Protection Yes, unit de-rated and shutdown

Equalize 16.0 V

Storage Range (temp) -40° to 70° C

Power consumption (DC 12V) 700W (Full Load)

Charging Control Four stages (Bulk/Absorption/Float/Maintenance), Two stages (Bulk/Absorption)Constant Power Supply (Program setting), Priority Battery Bank Charging

Output System Voltage12V

Operating Range (temp) -20° to 60° C

Charger Voltage 12V

Humidity 5-95%, relative humidity non-condensing

Net Weight (kg)2.6

DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread

Output Short Circuit Yes, (with user replaceable fuse/s)

Power Factor Correction Yes

Temperature Setting Hot, Normal, Cold (no sensor connected)

Charger Mode Output Voltage14.2 – 15.5 V

Charger Efficiency > 82%

AC Input Operating Range 207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max)

Standby Current < 2 mA LCD Display Charging status, Battery Voltage, Output Current & Fault Codes. Dimensions 295 x 206x 86 mm (L x W x H) Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations. AC Input Connection IEC with Supplied 1.2M Power Lead Over Charge Yes, unit shutdown AC Input Frequency Range 47 – 63 Hz Selectable Battery Type Gel, AGM, Flooded, Lithium, Program Optional Accessories Remote Digital Display / Enerdrive Part Number EN3REM Cooling Forced air ventilation (thermo controlled fan)