Truma Combi 4E Kit- Gas or Electric Heater / Hot Water System with Cream Cowl
$2,699.00
Dimensions 450W x 510D x 300H Weight 16.2Kg Warranty 2 Years
Pre order
Truma Combi 4E Kit, Gas Heater / Hot Water System, Cream Cowl, with flue kit & controller. Recreational vehicle room-heating and hot water system all in one. This Truma Combi 4E allows the water heating function to be used simultaneously or independent of the room heating, comes with a cream cowl.
This appliance operates on Gas (requires 12 volt to ignite) and the Water Heater operates on 240 volt power when available.
The kit includes room thermostat, control panel with 3m cable, fastening parts, ABO/drain valve and elbow fittings for 10 mm water hoses. Ducting & Pipe Set with varying lenghts available in Accessories List.
Key Features:
Gas powered (12v for ignition), 240v elec powered water heating option
Air and water heating functions can work simultaneously or independantly
LCD control panel
Heating output of approx. 2000 to 4000 watts
10 litre stainless steel water tank
Quick water heating of approx. 20 minutes
Compact and lightweight
Cream Cowl *This is a gas powered product and needs to be installed and certified by a qualified and licensed gas-fitter, as improperly or illegally installed products will void the manufacturer’s warranty, and could pose a safety risk.*
Energy sources Propane / butane + electricity
Operating pressure 30 mbar
Rated heat output in gas mode 2000 W / 4000 W
Rated heat output in electric mode 900 W / 1800 W
Rated heat output in mixed mode max. 3800 W
Fuel consumption 160 – 335 g/h
Power consumption (at 12 V): operation of heater and water container
max. 6.5 A for short periods (average approx. 1.2 A)
Power consumption (at 230 V) 3.9 A / 7.8 A
Water capacity 10 litres
Heating time (from approx. 15 °C to approx. 60 °C): Water container approx. 23 min.
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033
Weight approx. 15.5 kg
Dimensions (L x W x H) 510 x 450 x 300 mm
Installation dimensions (min.imum dimensions–additional space must be provided for the gas connection. water connections and drain valve (L x W x H) depending on the installation situation) 540 x 500 x 350 mm
Power consumption (at 12 V): heating water container max. 0.4 A
Air flow rate (free blowing) with 4 warm air outlets max. 287 m³/h
Quiescent current approx. 1 mA
Quiescent current consumption CP plus (optional) 3 mA
Frost Control heating element (optional) max. 0.4 A
Pump pressure max. 2.8 bar
System pressure max. 4.5 bar
Combi-2E-4E-Operating-Instructions (Click here to download) No video available.
